Precision Digital PD6300 ProVu Input Flow Rate/Totalizer

PD6300 ProVu

The PD6300 ProVu is specifically designed to display flow rate and total from a pulse output (NPN, PNP, TTL, switch contact, sine wave, etc.) flowmeter.

  • Gate Function for Rate Display of Slow Pulse Rates
  • Isolated 24 VDC Transmitter Power Supply
  • Universal 85-265 VAC, or 12/24 VDC Input Power Models
  • K-Factor Calibration or Scale with up to 32-Point Linearization
  • 4-20 mA Output Option Converts the Pulse Input to an Isolated 4-20 mA Output
  • NEMA 4X, IP65 Front
2 to 3 Weeks



Need Help? Ask an Expert!

Product Details

ProVu Dual-Line 6-Digit Flow Rate/Totalizers

The PD6300 ProVu Series flow rate/totalizer is particularly well-suited for flow applications because they can display flow rate and flow total at the same time, provide power to drive the flowmeter, and display flow total, flow grand total, or non-resettable flow total on up to nine digits.

Key Features

Display Flow Rate, Total or Grand Total

The upper display can be programmed to display flow rate, total, or grand total, and the lower display can be programmed to display flow rate, total, grand total, engineering units, custom legends, or can be turned off. Both displays could also display relay set points, or max and min values

Super-Bright LEDs make Standard and SunBright Display Models Even Brighter

The ProVu's standard and SunBright display models feature extraordinarily bright LED displays. They are perfect for indoor and outdoor applications where visibility may be impaired by smoke, fog, dust, or distance. The intensity on the SunBright model display is so high it can be read even in the brightest sunlight.

Free USB Programming Software & Cable

The ProVu comes preloaded with free MeterView Pro programming software that connects and installs directly to your PC with a standard USB cable, also provided free with each instrument. The software will allow you to configure, monitor, and datalog a ProVu PD6300 using your PC. Just simply connect the meter to your PC with the USB cable and within minutes you will be programming it.

Documents & Downloads