WS700-4/20MA : COMPOSITE/DISCRETE WATER SAMPLER. 4/20MA INPUT MODULE
WS700-4/20MA : COMPOSITE/DISCRETE WATER SAMPLER. 4/20MA INPUT MODULE 4-20mA to Pulse Converter Module This module is for use with flow monitors that produce a 4-20mA output. There are two versions available, one that pulses every 15 minutes at 20mA (RG750) and one that pulses every 30 minutes at 20mA (RG755). Please specify the unit conversion that best suits your application
Composite/Discrete Water Samplers Specifications
Operating Temperature: 0° to +70°C Size of unit: 22”H X 17"W X 9"D Weight: 20lb (Shipping Weight 22lb) Materials: Enclosure: Expanded UV protected PVC Bottle: 2.5 gallon Polyethylene Pickup Hose: 15' reinforced PVC 1/4" ID polyethylene flexible tubing section with intake strainer Pump Tubing: Norprene 1/4" ID, 7/16” OD Sample Pump: Flow Rate: 1000 ml per minute at a 4 foot head Type: Peristaltic Maximum Lift: ~20 feet Battery: Rechargeable 5 AH Gel Cell Battery Life: ~1 hour, continuous pumping under load Standby: 3 months while still retaining enough power to run the pump to capacity Start Delay: 16 time settings from 0 to 12 hours Composite Interval: 15 time settings from 5 min. to 12 hours plus an External Trigger mode setting Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head) External Trigger Input: 250mS minimum pulse width Switch closure or 4-24VDC Pulse Output: 5VDC one-second pulse 1000ohm output impedance Bottle Switch Input: Switch closure Input Floating read switch in bottle Rain and Water Sensors: Optional moisture sensors or switch closure inputs Internal Fuse: 10A Slow-Blow
Purchase
Starting at $1,625.00
Features
Ideal for wastewater, industrial and environmental sampling
CE Certified
Does composite, or discrete sampling
Simple to operate – no programming required
Output provided for use with optional datalogger
Lightweight and easy to carry
Rugged construction for harsh environments
Meets federal, state and local wastewater regulations
Timed and external flow pulsed samples
Adjustable and repeatable sample volume
Peristaltic pump prevents sample contamination
Automatic backflush clears pickup strainer and hose
WS700 : COMPOSITE/DISCRETE WATER SAMPLER. 4/20MA INPUT. 4-20mA to Pulse Converter Module This module is for use with flow monitors that produce a 4-20mA output. There are two versions available, one that pulses every 15 minutes at 20mA (RG750) and one that pulses every 30 minutes at 20mA (RG755). Please specify the unit conversion that best suits your application
Composite/Discrete Water Samplers Specifications
Operating Temperature: 0° to +70°C Size of unit: 22”H X 17"W X 9"D Weight: 20lb (Shipping Weight 22lb) Materials: Enclosure: Expanded UV protected PVC Bottle: 2.5 gallon Polyethylene Pickup Hose: 15' reinforced PVC 1/4" ID polyethylene flexible tubing section with intake strainer Pump Tubing: Norprene 1/4" ID, 7/16” OD Sample Pump: Flow Rate: 1000 ml per minute at a 4 foot head Type: Peristaltic Maximum Lift: ~20 feet Battery: Rechargeable 5 AH Gel Cell Battery Life: ~1 hour, continuous pumping under load Standby: 3 months while still retaining enough power to run the pump to capacity Start Delay: 16 time settings from 0 to 12 hours Composite Interval: 15 time settings from 5 min. to 12 hours plus an External Trigger mode setting Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head) External Trigger Input: 250mS minimum pulse width Switch closure or 4-24VDC Pulse Output: 5VDC one-second pulse 1000ohm output impedance Bottle Switch Input: Switch closure Input Floating read switch in bottle Rain and Water Sensors: Optional moisture sensors or switch closure inputs Internal Fuse: 10A Slow-Blow
