DOPPLER FLOWMETER DFM5

F-100-DFM5 : ULTRASONIC DOPPLER FLOWMETER AND TRANSDUCER WITH 20 FT OF CABLE.

This clamp- on Ultrasonic flowmeter replaces the DFM5 and is ideal for monitoring those difficult liquids. Easy installation on metal and plastic pipes that are full of liquid. Recommended for dirty liquids, wastewater, sewage, sludge. paper stock, slurries and more.. Application requirements are for liquids with suspended solids or aeration >100 Microns >75 PPM .

SPECIFICATIONS:
P/N# F-100-DFM5 

Transmitter
Enclosure………..Nema 4X (IP66) 7.4”W x 10.94Hx
                              5.12”D
Accuracy..............  +/- 2% full scale
                              Requires >100 microns that are                                >75 ppm suspended solids or 
                              bubbles.
Power:…………   100-130VAC 50/60 Hz, 5watts                               (Opt. 24 VDC)
Calibration…….    Built-in 5 key calibrator Display…………   Digital LCD, Flow Rate,    
                             Totalizer, Menu, Status, Signal
                             Strength.
Output………….   Isolated 4-20mA (1000 ohm
                             max)
Control Relay…..  Qty 3, rated 5 amp SPDT,
                              programmable.                   
Set Points ……..   Field adjustable ON/OFF adj.

                              range from .25 to 10 FPS.    
Flow Range…….. 0.25 to 40FPS
                              (0.08 to 12.2m/sec)
Temp……………. -10⁰ to 140⁰ F (-23⁰  to 60⁰C)

Transducer
Type……………   Model SE4 Single-Head 
                               transducer, with 20 ft of cable. 
Pipe Size………    ½” to 180”  (12.7mm to 4.5m)Mounting Kit……. Metal pipe strap(s), Acoustic
                                mounting Sealant.. Temperature……  -40⁰ F to 300⁰F (-40⁰  to 150⁰C)